Eğitimler: Parlak ve mat boya için motosiklet bakımı

1. Remove coarse dirt with a high-pressure cleaner. Keep a minimum distance of 50 cm from sensitive parts (bearings, seals, electronics).
2. Spray Supreme Motorcycle Cleaner onto the cold, dry surface, spread with a brush and let it act for 1–2 minutes.
3. Gently rinse off with the high-pressure cleaner.
4. Wash the motorcycle with Motorcycle Wash (Bike Bath) and the Waschpudel. Two-bucket method: one bucket with clean water for rinsing, one bucket with Bike Bath.
5. Rinse thoroughly with clean water. Dry carefully with the Ultra-Dry.

1. Clean the paint surface thoroughly and dry completely (as described under hand washing).
2. Apply Cleaner Fluid Regular with a polishing sponge in horizontal or vertical motions.
3. Wipe off with the Micro-Fluffy. Then apply a thin layer of Bike Sheen wax with an applicator.
4. Let cure for 10–15 minutes, then buff to a high gloss with a clean Micro-Fluffy. Do not press too hard.

Optional: Additionally seal the wax layer with Lotos Speed or Keramiq9.

1. Remove coarse dirt with a high-pressure cleaner.
2. Spray cold rims with Wheel Spray Forte.
3. Let act for 1–2 minutes. Spread with a soft rim brush and loosen brake dust. Wheel Spray Forte turns violet as a working indicator.
4. Rinse thoroughly with clean water and dry with the Ultra-Dry.

Optional: Seal the rims with Autobahn PTFE wheel wax for easier future cleaning.

1. Remove coarse dirt with a high-pressure cleaner. Keep a minimum distance of 50 cm from sensitive parts.
2. Spray Supreme Motorcycle Cleaner onto the cold, dry surface, spread and let it act for 1–2 minutes.
3. Rinse gently.
4. Wash the motorcycle with Motorcycle Wash Opaque and the Waschpudel. Use the two-bucket method.
5. Rinse thoroughly and dry carefully with the Ultra-Dry.

1. Clean matte paint with Motorcycle Pre-Cleaner Opaque to remove old sealants, contamination and oil traces.
2. Apply a thin layer of Bike Sheen Opaque wax with an applicator.
3. Do not let the wax cure – buff gently with the Micro-Fluffy. Do not press too hard.

Optional: Additionally seal the wax layer with Lotos Speed or Keramiq9.